NIKKOR Z 28mm f/2.
Before using this product, please read these instructions carefully. You will also need to consult the camera manual. • This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z mount. • Update the camera firmware to the latest version. With earlier versions, the camera may fail to detect the lens correctly and some features may not be available. The latest version of the camera firmware can be downloaded from the Nikon Download Center at the URL below. https://downloadcenter.
A WARNING • Keep dry. Do not handle with wet hands. Failure to observe these precautions could result in fire or electric shock. • Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols. Failure to observe this precaution could result in explosion or fire. • Do not directly view the sun or other bright light source through the lens. Failure to observe this precaution could result in visual impairment. • Keep this product out of reach of children.
A CAUTION • Do not transport cameras or lenses with tripods or similar accessories attached. Failure to observe this precaution could result in injury or product malfunction. Notices for Customers in the U.S.A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTIONS Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.
Using the Lens Parts of the Lens: Names and Functions See below for the names and functions of the parts of the lens.
q Control ring Lens mounting w mark e CPU contacts Autofocus mode selected: In autofocus mode, rotate the ring to adjust a setting such as [Focus (M/A)] or [Aperture] assigned using the camera. — For more information, see the description of [Custom control assignment], [Custom controls], or [Custom controls (shooting)] in the camera manual. Manual focus mode selected: — Rotate the ring to focus. Use when mounting the lens on the See A camera. (08) Used to transfer data to and from the — camera.
A Attachment and Removal Attaching the Lens z Turn the camera off, remove the body cap, and detach the rear lens cap. x Position the lens on the camera body, keeping the mounting mark on the lens aligned with the mounting mark on the camera body, and then rotate the lens counterclockwise until it clicks into place. Removing the Lens z Turn the camera off. x Press and hold the lens release button while turning the lens clockwise.
Cameras with AF-Assist Illuminators The lens may block the light from the camera AF-assist illuminator. • For the latest information on using the lens with cameras that have built-in AF-assist illuminators, visit the site below. https://downloadcenter.nikonimglib.com/ Precautions for Use • • • • Do not pick up or hold the lens or camera using only the lens caps. Keep the CPU contacts clean. Replace the lens caps when the lens is not in use.
Lens Care • Removing dust is normally sufficient to clean the glass surfaces of the lens. • Smudges, fingerprints, and other oily stains can be removed from the lens surface using a soft, clean cotton cloth or lens cleaning tissue lightly dampened with a small amount of ethanol or lens cleaner. Wipe gently from the center outwards in a circular motion, taking care not to leave smears or touch the lens with your fingers. • Never use organic solvents such as paint thinner or benzene to clean the lens.
Accessories Supplied Accessories • LC-52B Lens Cap (front cap) • LF-N1 Lens Cap (rear cap) Compatible Accessories • CL-C4 Lens Case • 52 mm filters D Filters Use only one filter at a time.
Specifications Mount Focal length Maximum aperture Lens construction Angle of view Focusing system Minimum focus distance (measured from focal plane) Maximum reproduction ratio Diaphragm blades Aperture range Filter-attachment size Dimensions Nikon Z mount 28 mm f/2.8 9 elements in 8 groups (including 2 aspherical elements) • FX format: 75° • DX format: 53° Internal focusing system 0.19 m (0.63 ft) 0.2× 7 (rounded diaphragm opening) f/2.8 – 16 52 mm (P = 0.75 mm) Approx. 71.5 mm (2.9 in.