Specification Sheet

The TC800-1.25E ED teleconverter is for use exclusively with AF-S NIKKOR 800 mm f/5.6E FL ED VR lenses.
Autofocus is available only with cameras that offer f/8 support.
When focusing at minimum focus distance with this lens at maximum zoom, electronic rengefinder may be displayed when image on matte screen in viewfinder is not in
focus. Adjust focus manually until image in viewfinder is in focus.
With maximum aperture of f/5.6 or faster.
With maximum aperture of f/8.0 or faster.
The following accessories and non-CPU lenses can not be used. TC-16AS AF teleconverter, Non AI lenses, Lenses that require the AU-1 focusing unit (400mm f/4.5,
600mm f/5.6, 800mm f/8, 1200mm f/11), Fisheye (6mm f/5.6, 7.5mm f/5.6, 8mm f/8, OP10mm f/5.6), 2.1cm f/4, K2 rings, ED180-600mm f/8 (Serial Numbers 174041 -
174180）, ED 360 - 1200mm f/11 (Serial Numbers 174031 - 174127), 200 - 600mm f/9.5 (Serial Numbers 280001 - 300490), Lenses for the F3AF (AF80mm f/2.8, AF
ED200mm f/3.5, TC-16S), PC28mm f/4 (Serial Numbers 180900 or earlier), PC35mm f/2.8 (Serial Numbers .851001 - 906200), PC35mm f/3.5 (old type), 1000mm f/6.3
Reflex (old type), 1000mm f/11 Reflex (serial number 142361 - 143000), Reflex 2000mm f/11 Reflex (serial number 200111 - 200310)
If the maximum effective aperture is faster than f/8, autofocus is available. However, if the maximum effective aperture is slower than f/5.6 and the subject is dark or lacks
sufficient contrast, the camera may be unable to focus. Single-point AF is used when 3D-tracking or auto-area AF is selected for AF-area mode.
If the maximum effective aperture is faster than f/8, autofocus is available. However, if the maximum effective aperture is slower than f/5.6 and the subject is dark or lacks
sufficient contrast, the camera may be unable to focus.
If the maximum effective aperture is faster than f/8, autofocus is available. However, if the maximum effective aperture is slower than f/5.6 and the subject is dark or lacks
sufficient contrast, the camera may be unable to focus.
Camera exposure meter can not be used.
Can be used at shutter speeds slower than 1/125 s, but camera exposure meter can not be used.
Can be used at shutter speeds slower than 1/60 s, but camera exposure meter can not be used.
D3000, D3100, D3200, D3300, D40/D40X, D50, D5000, D5100, D5200, D5300, D5500, D60, D70/70S, D80, D90, D100, D200 : Attach in vertical orientation (can be used
in horizontal orientation once attached).
Can be used in manual exposure [M] mode at shutter speeds slower than 1/180 s, but camera exposure meter can not be used.
Manual exposure [M] mode only.
Range of rotation for this lens tripod mount limited by D60, D200, D300, D300S, D600, D610, D700, D750, D800, D800E, D810, D810A, D7000, D7100, D7200, D500,Df,
D2-series, D3 series D4 series, or D5 camera body.
Filters can not be exchanged while the lens is mounted on D60, D200, D300, D300S, D600, D610, D700, D750, D800, D800E, D810, D810A, D7000, D7100, D7200,
D500,Df, D2-series, D3 series, D4 series, or D5 camera body.
If maximum aperture is specified using [Non-CPU Lens Data option] in shooting menu, aperture value will be displayed in viewfinder and control panel.
Can be used only if lens focal length and maximum aperture are specified using [Non-CPU Lens Data option] in shooting menu. Use spot or center-weighted metering if
desired results are not achieved.
For improved precision, specify lens focal length and maximum aperture using [Non-CPU Lens Data option] in shooting menu.
Can be used at in manual exposure modes at shutter speeds slower than 1/125 s.