Owner's Manual

~ Out of Memory
If the memory card is full, the interval timer will remain active but no
pictures will be taken. Resume shooting (pg. 195) after deleting some
pictures or turning
the camera off and inserting another memory card.
B Bracketing
Adjust bracketing settings before starting interval
timer photography. If
exposure and/or flash bracketing is active while interval timer
photography
is in effect, the camera will take the number of shots in the
bracketing program at each interval, regardless of the number of shots
specified in the interval
timer menu. If white balance bracketing is active
while interval timer photography
is in effect, the camera will take one shot
at each interval and process
it to create the number of copies specified in
the bracketing program.
B During Shooting
During interval
timer photography, the IIo-*W,', icon
in the control panel will blink. Immediately before
the next shooting interval begins,
the shutter
speed display will show the
number of intervals
remaining, and the aperture display will show the
number
of shots remaining in the current interval. At other times, the
number of intervals remaining and the number of shots in each interval
can be viewed by pressing
the shutter-release button halfway (once the
button is released, the shutter speed and aperture will be displayed until
the exposure meters turn off).
To view current interval timer settings, select
[Interval timer shooting] between shots. While
interval
timer photography is in progress, the
interval timer menu will show the starting time,
the current time, and the number
of intervals and
shots remaining. None
of these items can be
changed while interval
timer photography is in
progress.
194