Owner's Manual

Flash Compensation
~ button Sub-command
dial
Flash compensation is used to alter flash output by from -3 EV to
+1 EV in increments of lhEV, changing the brightness of the main
subject relative
to the background. Flash output can be increased
to make the main subject appear brighter, or reduced to prevent
unwanted highlights or reflections.
Press the ~ button and rotate
the sub-command dial until the
desired value
is displayed in the
control panel.
In general, choose
positive values
to make the main
subject brighter, negative values
to make it darker.
(-J]
-0.3 EV
(~J]
±O EV (~ button
pressed)
:25 F5.o p
At values other than +0, a ~ icon will be
displayed in the control panel and
viewfinder after you release the
~ button.
The current value for flash compensation
can be confirmed by pressing
the ~
button.
Normal flash
output can be restored by
setting flash compensation
to +0.0. Flash
compensation is not reset when the camera
is turned off.
(-)]
+1.0 EV
190