Owner's Manual

OFF
ON
No 1 I
Non-CPU lens data
c _._..._S.~Tl!.fl .. ~.~~~. _
• Image authentication
4' Copyright information
;, Save/load settings
GPS
ti.lIl Virtual horizon
'IE.
: AF fine tune
:6 Firmware version
Highlight Non-CPU lens data
in the setup menu (pg. 331)
and
press~.
II The Non-CPU Lens Data Menu
1 Select Non-CPU lens data.
2 Select a lens number.
Highlight lens number and
press
~ or ~ to choose a lens
number between 1 and 9.
3 Select a focal length.
Highlight Focal length (mm)
and press ~ or ~ to choose a
focal length between
6 and
4,000 mm.
4 Select a maximum
aperture.
Highlight Maximum aperture
and press ~ or ~ to choose a
maximum aperture between
f/1.2 and f/22. The maximum aperture for teleconverters is the
combined maximum aperture of the teleconverter and lens.
211