Owner's Manual

12 Requires PK-12 or PK-13 auto extension ring. PB-6D may be required
depending
on camera orientation.
13 Use preset aperture. In aperture-priority auto exposure mode, set aperture
using focusing attachment before determining exposure and taking
photograph.
•
PF-4 Reprocopy Outfit requires PA-4 Camera Holder.
1& Compatible Non-CPU Lenses
If lens data are specified using Non-CPU lens data (pg. 210), many of the
features available with CPU lenses can also be used with non-CPU lenses.
If lens data are not specified, color matrix metering can not be used, and
center-weighted metering is used when matrix metering is selected.
Non-CPU lenses can
only be used in exposure modes Aand 11, when
aperture must be set using the lens aperture ring. If the maximum
aperture has not been specified using Non-CPU lens data, the camera
aperture display will show the number of stops from maximum aperture;
the actual aperture value must be read off the lens aperture ring.
Aperture-priority auto will be selected automatically in exposure modes P
and 5. The exposure-mode indicator (P or 5) in the control panel will
blink, and A will be displayed in the viewfinder.
~ Incompatible Accessories and Non-CPU Lenses
The following accessories and non-CPU lenses can NOT be used with the
0700:
•
TC -16AS AF teleconverter • AF lenses for the F3AF (AF 80mm
• Non-AI lenses f/2.8,
AF 200mm f/3.5 ED,
• Lenses that require the AU-1 AF Teleconverter TC -16)
focusing
unit (400mm f/4.5, 600mm • PC 28mm f/4 (serial number 180900
f/5.6, 800mm
fl8, 1200mm f/ll) or earlier)
• Fisheye (6mm f/5.6, 7.5mm
fl5.6, • PC 35mm f/2.8 (serial numbers
8mm f/8,
OP 10mm f/5.6) 851001-906200)
•
2.1 cm f/4 • PC 35mm fl3.5 (old type)
• Extension
Ring K2 • Reflex 1 OOOmm f/6.3 (old type)
• 180-600mm f/8
ED (serial numbers • Reflex 1 OOOmm f/11 (serial numbers
174041-174180) 142361-143000)
• 360-1200mm
f/ll ED (serial • Reflex 2000mm f/l1 (serial numbers I~
numbers 174031-174127) 200111-200310)
• 200-600mm
fl9.5 (serial numbers
280001-300490)
373