Owner's Manual
Table Of Contents
- Using the Supplied Manuals
- Quick Start Guide
- Owners Manual
- Two-Button Reset
- Set Language / Time
- Table of Contents
- Q & A Index
- Supplied Accessories
- Parts & Controls
- Getting Started
- Basic Photography & Playback
- Focus
- Image Size & Quality
- Release Mode
- Using the Built-In Flash
- ISO Sensitivity
- P, S, A, and M Modes
- Exposure
- White Balance
- Picture Controls
- Active D-Lighting
- Multiple Exposure
- Using an Optional GPS Unit
- More Playback Options
- Connecting to Other Devices
- Menu Guide
- Compatible Lenses
- Optional Flash Units
- Other Accessories
- Care / Maintenance
- Troubleshooting
- Error Messages
- Defaults
- Memory Card Capacity
- Specs
- Index
- Corrections to Manual
- Software Installation Instructions
- Scan of Software CD-ROM
- AC Power Cord Specs
- Warranty
High-Definition Devices
The camera can be connected
to
HOMI devices using a type C mini-pin HOMI cable
(available separately from
third-party
suppliers).
1 Turn the camera off.
Always
turn
the
camera
off
before connecting or disconnecting an HOMI cable.
2 Connect the HOMI cable
as
shown.
Connect to
camera
D .
...
7'1
Connect to high-
definition device
(choose cable with
connector for
connected device)
3 Tune
the
device to the HOMI channel.
4 Turn the camera on and press the
[B
button.
During playback, images will be displayed on
the
high-definition television or
monitor
screen;
the
camera
monitor
will remain
off
.
• HOMI (pg. 203)
At
the default setting
of
Auto,
the
camera automatically selects
the
appropriate HDMI
format
for
the
high-definition device. The HDMI
format
can be chosen using
the
HOMI
option
in the
setup menu (pg. 203).
147