Owner's Manual

f3: Assign FUNC. Button
Choose the role played by the Fn button. This option is
available in all shooting modes.
@ Flash off
FVlock
m (default)
Option Description
..................................- , " .. !,.
,Press the Fn button and rotate the main command dial to turn the grid
1mI Framing grid idisplay in the viewfinder on or off (pg. 9).
PresstheFnhuttonand':otatethemaincommanddiiiftoselecitheAF~
[+] AF-area mode
:area mode (pg. 173).
'~~~' Center focus' ' "'Pressthe'Fnbutto'nancT':otatethe'main"commanddia Ito'aloose
I 1 point i between normal and wide center focus points (pg. 174).
iPress the Fn button to lock flash value (built-in flash and SB-900, SB-800,
iSB-600, SB-400, and SB-R200 flash units only, see below). Press again to
'cancel FV lock.
iThe b'uilt-inflash and optional flash'units turn offwhile the Fn button'is
:pressed.
Center-weighted metering is activated while the Fn button is pressed.
I
IMatrix metering is activated while the Fn button is pressed.
.................................... + .....
Matrix
~
metering
............ "-'-"----"-"'-'--- ..
Center-
~ weighted
metering
GJ Spot metering "'Spotmeteiing is activated while the Fnbutton is pressed:
~ Access topite Press the Fnhutton tojump to the top item Tn ,iMYMENU:iSelecithis
in MY MENU option for quick access to a frequently-used menu item.
ifimage'q'ualftyis'setto-iPEG-ilne, 'JP'EG-.l'o'rmaCo'rJPECfbasic:"RAW'"
will be displayed in the control panel and an NEF (RAW) copy will be
recorded with the next picture taken after the Fn button is pressed. To
exit without recording an NEF (RAW) copy, press the Fn button again or
turn the camera off.
+M +NEF (RAW)
197