Owner's Manual

I mage Dust off Ref Photo MENU button -+ Ysetup menul
• ..,...-# ......... _, .... "-".,-."'--~ __ ..,."'-.., .... ""r~~ ..... __ ....... ~-.:~~~·~'I!'-"~4·P......,·~·,·_"'. "-.-..~""'.,~~'"'. __ "',. ... ""- __ "'~., ~ ... ~-.. ...... _i<- ........ ~-..~ __ ""'-~...,,. __ """"',,">.-""'<:c,._ .,.~ ........ "', • ..,. .... ~ ,,.,, ..... ,*"--o-;_o ... "'~ .... _"'~ ... ~
Acquire reference data for the Image Dust Off option in Capture NX 2 (available
separately; for more information, see the Capture NX 2 manual).
Image dust off ref photo is available only when a CPU lens is mounted on the
camera. A lens with a focal length of at least 50 mm is recommended. When using a
zoom lens, zoom all the way in.
1 Choose a start option.
Highlight one of the following options and press
€). To exit without acquiring image dust off
data, press MENU.
• Start: The message shown at right will be
displayed and "rEF" will appear in the
viewfinder.
• Clean sensor and then start: Select this option to
clean the image sensor before starting. The
message shown at right will be displayed and
"rEF" will appear in the viewfinder when
cleaning is complete.
~
~ Image Sensor Cleaning
Dust off reference data recorded before image sensor cleaning is performed can not
be used with photographs taken after image sensor cleaning is performed. Select
~
Clean sensor and then start only if the dust off reference data will not be used with
existing photographs.
.. _ . ~ --J
2 Frame a featureless white object in the viewfinder.
With the lens about ten centimeters (four inches) from a well-lit, featureless
white object, frame the object so that it fills the viewfinder and then press the
shutter-release button halfway.
In autofocus mode, focus will automatically be set to infinity; in manual focus
mode, set focus to infinity manually.
171