Owner's Manual

---------- -- --j
®,o
~
Wireless Remote Control Ml-l3 (067): Use as a remote shutter release for self-portraits
or to prevent blur caused by camera shake. The ML-L3 uses a 3 V CR2025 battery.
~
-~~--
cD ~:~ . ('·~<-..:::::V-~~·
~'.h '
et ... ,~~~'''-...
~~./
(2)
,~
Pressing the battery-chamber latch to the right (0)), insert a fingernail into the gap
and open the battery chamber ((~)). Ensure that the battery is inserted in the
correct orientation ((~)).
The 05000 is equipped with an accessory terminal for
MC-DC2 remote cords (U 86) and GP-1 GPS units
(..:.J 114), which connect with the .... mark on the
connector aligned with the ~ mark next to the
accessory terminal as shown at right (to access the
accessory terminal, open the connector cover; close the
cover when the terminal is not in use).
Remote
controls
Accessory
terminal
accessories
Almroved Memor~ Cards
The following SO memory cards have been tested and approved for use in the 05000.
All cards of the designated make and capacity can be used, regardless of speed.
SanDisk
Toshiba
Panasonic
512MB,l GB,2GB',4GBt,8GBt, 16GBt
512 MB, 1 GB, 2 GB ',4GB t, 8 GB t, 16 GB t, 32 GB t
512 MB, 1 GB, 2 GB ',4GB t, 6 GB t, 8 GB t, 12 GB t, 16 GB t, 32 GB t
512
MB, 1 GB, 2 GB', 4 GB t, 8 GB t
lexar Media Platinum II: 512 MB, 1 GB, 2 GB', 4 GB t 8 GB t
Professional: 1 GB, 2 GB', 4 GB t 8 GB t
* If card will be used with card reader or other device, check that the device supports 2GB cards.
t SDHC compliant. If card will be used with card reader or other device, check that the device S~
supports SDHC. 1:13
Other cards have not been tested. For more details on the above cards, please
contact the manufacturer.
203