Owner's Manual

II HC/ean at Startup/Shutdown
H
1 Select Clean at startup/shutdown.
Display the Clean image sensor menu as
described in Step 2 on the previous page.
Highlight Clean at startup/shutdown and
press ~.
2 SE~lect an option.
Highlight one of the following options and
press @.
,@:. I.~. I .. ~ •... \\
\ '" / "
\ /
\/ ,
Option Description
CI
The image sensor is automatically cleaned each time the
ean at startup .
camera IS turned on.
The
image sensor is automatically cleaned during shutdown
each time the camera is turned off.
The
image sensor is cleaned automatically at startup and at
shutdown.
Automatic image sensor cleaning off.
Clean at
shutdown
Clean
at startup
& shutdown
i~ Cleaning off
<!lON
<!>OFF
~ Image Sensor Cleaning
Using camera controls interrupts image sensor cleaning. Image sensor cleaning may not be
performed at startup if the flash is charging.
Cleaning
is performed by vibrating the low-pass filter. If dust can not be fully removed using
the options in the Clean image sensor menu, clean the image sensor manually ('--J 208) or
consult a Nikon-authorized service representative.
If image sensor cleaning is performed several times in succession, image sensor cleaning
may be temporarily disabled to protect the camera's internal circuitry. Cleaning can be
performed again after a short wait.
------_._-~--_._---------------------_._-------'
207