Owner's Manual

Release Mode
Release mode determines how the camera takes photographs: one at a time, in a
continuous sequence, with a timed shutter-release delay or remote control, or with
reduced camera noise.
1 Place the cursor in the information display.
If shooting information is not displayed in the monitor, press the 1m! button.
Press the ·n· button to place the cursor in the information display.
~ button
[
Information display -0- button
2 Display release mode options.
Highlight the current release mode in the
information display and press ®.
3 Choose a release mode.
Highlight one of the following options and press
0.
Mode
[]] Single frame
~ Continuous
o Self-timer
g 2s Delayed remote
Quick-response
g
remote
[[I Quiet shutter-
release
Description
Camera takes one photograph each time shutter-release button is
pressed.
Camera records
about 4 frames per second while shutter-release
button is held down.
Use for self-portraits or to reduce blurring caused by camera shake
(LJ 67).
Optional ML-L3 wireless remote control required. Shutter is
released after two-second delay (:.:..J 67).
Optional ML-L3 wireless remote control required. Shutter is
released immediately (U 67).
As for []] (single frame) except that camera makes no sound until
finger is removed from shutter-release button after shooting and
beep does not sound when camera focuses, keeping noise to a
minimum in quiet surroundings.
65