Owner's Manual

----------------------------------------,
~ Before Using the Remote Control
Before using the remote control for the first time, remove the clear plastic battery insulator
sheet.
~ Using the Built-in Flash
Before taking a photograph with the flash in P, S, A, M, or fl modes, press the ~ button to raise
the flash and wait for the ~ indicator to be displayed in the viewfinder (0 70). Shooting will
be interrupted if the flash is raised after the self-timer or delayed remote timer has started.
In
auto or scene modes in which the flash pops up automatically, the flash will begin
charging when delayed remote or quick-response remote mode is selected; once the flash is
charged, it will automatically pop up and fire if required when the shutter-release button on
the ML-L3 is pressed. The camera will only respond to the shutter-release button on the
ML-L3 once the flash has charged. Only one photograph will be taken when the flash is used,
regardless
of the number of shots selected for Custom Setting c3 (Self-timer, 0 157).
In flash
modes that support red-eye reduction, the red-eye reduction lamp will light for
about one second before the shutter is released. In delayed remote mode, the self-timer
lamp will light for two seconds, followed by the red-eye reduction lamp, which lights for one
second before the shutter is released to reduce red-eye.
• The ~ Button
Self-timer mode can also be selected by pressing the
~ button (0 163).
• See Also
For information on changing the duration of the self-timer and choosing the number of
shots taken, see Custom Setting c3 (Self-timer, 0157). For information on choosing the
length of time the camera will remain in standby mode before remote control mode is
cancelled, see Custom Setting c4 (Remote on duration, 0157). For information on
controlling the beeps that sound when the self-timer and remote control are used, see
Custom Setting d 1 (Beep, L.J 158).
69