Owner's Manual

4 Measure white balance.
Before the indicators stop flashing, frame the
reference object so that it fills the viewfinder and
press
the shutter-release button all the way down. The camera
will measure a value
for white balance and store it in preset
d-O. No photograph will be recorded; white balance can be
measured accurately even
when the camera is not in focus.
5 Check the results.
Gd PrE
If the camera was able to measure a
value
for white balance, [,Qe,d will flash
in
the control panel for about six
seconds,
while the viewfinder will show
fl
h
·
,-,
a as Ing LtQ.
If lighting is too dark or too bright, the
camera may be unable to measure
white balance. A flashing ,-,e, ['d will
appear in
the control panel and
viewfinder for about six seconds. Press
the shutter-release button halfway to
return to Step 4 and measure white
balance again.
\ \ I I
-- Good -
I I \ \
P,- E
PRE
Control panel
~ \ ~
/ I '\
Viewfinder
\ \ I \ \ I
-no----Gd-
I I \ / I \
r/ .-
,- ,- c:
PRE
Control panel
~ \ I /
/ I \ \
Viewfinder
145