Owner's Manual

5 Select Done.
Highlight Done and press ®.
The specified focal length and [_~?
aperture will be stored under • .
the chosen lens number. This
combination of focal length
and aperture can be recalled at any time by selecting the lens
number using camera controls as described below.
II Choosing a Lens Number Using Camera Controls
1 Assign non-CPU lens number selection to a camera
control.
Select Choose non-CPU lens number as the //+command
dials"
option for a camera control in the Custom Settings
menu. Non-CPU lens
number selection can be assigned to the
Fn button (Custom Setting fS, Assign Fn button, CJ 292), the
depth-of-field preview button (Custom Setting f6, Assign
preview button,
CJ 296), or the AE-l/AF-l button (Custom
Setting f7,
Assign AE-L/AF-L button, OJ 296).
2 Use the selected control to choose a lens number.
Press the selected button and rotate the main command dial
until
the desired lens number is displayed in the control panel.
Main command dial
Focal Maximum
length aperture
rTIJ-~
'-----~
Lens number
197