Owner's Manual

"
Option Description
If Off is selected, the multi selector is used to choose the
,picture displayed during full-frame playback,
highlight
thumbnails, and navigate menus. If On is selected, the main
command dial can be used
to choose the picture displayed
during full-frame playback, move
the cursor left or right during
Menus thumbnail playback, and move the menu highlight bar up or
and .down. The sub-command dial is used to display additional
playback. photo information in full-frame playback and to move the
cursor
up or down during thumbnail playback. While menus
are displayed, rotating the sub-command dial right displays
.
the sub-menu for the selected option, while rotating it left
., displays the previous menu. To make a selection, press ~, the
center
of the multi selector, or €>.
19: Release Button to Use Dial MENU button .. ((I Custom Settings menu J
!."JiI;f¥;;~JnISi~~~~$ii~'i!<'f1,'!i~~-S7h~""~~llt~f$d!!I!lUt-W'if~,§!jl!£II.""~~;W'.;!I>(II~~mU4ll1flif-·'iJlfRI!!'iiIlWE-. jill ~., : _ E .ttl:!.- ij ·,~ .• .4~·'~·~""~'-1
Selecting Yes allows adjustments that are normally made by
holding the MODE, IB, ~, ISO, QUAL, or WB button and rotating a
command dial
to be made by rotating the command dial after the
button is released (this also applies to the button to which
bracketing
is currently assigned; 0 295). Setting ends when any of
the affected buttons is pressed again or the shutter-release button
is pressed halfway. Except when No limit is selected for Custom
Setting
c2 Auto meter-off delay or an optional EH-5a or EH-5 AC
adapter is used, setting will also end when the exposure meters
turn off.
298