Owner's Manual
Table Of Contents
- Quick Start Guide
- Users Manual
- Q&A Index
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- Live View
- Recording and Viewing Movies
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure/Bracketing
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Reset Custom Settings
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- d1: Beep
- d2: Viewfinder Grid Display
- d3: ISO Display and Adjustment
- d4: Viewfinder Warning Display
- d5: Screen Tips
- d6: CL Mode Shooting Speed
- d7: Max. Continuous Release
- d8: File Number Sequence
- d9: Information Display
- d10: LCD Illumination
- d11: Exposure Delay Mode
- d12: Flash Warning
- d13: MB-D11 Battery Type
- d14: Battery Order
- e: Bracketing/Flash
- f: Controls
- The Setup Menu: Camera Setup
- The Retouch Menu:Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Scan of CD-ROM
- Warranty
81
k
3 Frame the photograph.
4 Take the photograph.
Self-timer mode: Press the shutter-release
button halfway to focus, and then press the
button the rest of the way down to start the
self-timer (note that the timer will not start if the camera is unable to focus or in
other situations in which the shutter can not be released).
The self-timer lamp
will start to blink.
Two seconds before the photograph is taken, the self-timer
lamp will stop blinking.
The shutter will be released ten seconds after the timer
starts.
Remote control mode: From a distance of 5 m
(16 ft.) or less, aim the transmitter on the
ML-L3 at either of the infrared receivers on
the camera (0 3, 5) and press the ML-L3
shutter-release button.
In delayed remote
mode, the self-timer lamp will light for about
two seconds before the shutter is released.
In quick-response remote mode, the
self-timer lamp will flash after the shutter has been released.
In remote mirror-
up mode, pressing the ML-L3 shutter-release button once raises the mirror; the
shutter will be released and the self-timer lamp will flash after 30 s or when the
button is pressed a second time.
To cancel shooting, select another release mode.
A Cover the Viewfinder
When taking photos without your eye to
the viewfinder, remove the DK-21 rubber
eyecup (q) and insert the supplied DK-5
eyepiece cap as shown (w).
This
prevents light entering via the
viewfinder interfering with exposure.
Hold the camera firmly when removing
the rubber eyecup.
DK-21 rubber eyecup DK-5 eyepiece cap