Owner's Manual
Table Of Contents
- Quick Start Guide
- Users Manual
- Q&A Index
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- Live View
- Recording and Viewing Movies
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure/Bracketing
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Reset Custom Settings
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- d1: Beep
- d2: Viewfinder Grid Display
- d3: ISO Display and Adjustment
- d4: Viewfinder Warning Display
- d5: Screen Tips
- d6: CL Mode Shooting Speed
- d7: Max. Continuous Release
- d8: File Number Sequence
- d9: Information Display
- d10: LCD Illumination
- d11: Exposure Delay Mode
- d12: Flash Warning
- d13: MB-D11 Battery Type
- d14: Battery Order
- e: Bracketing/Flash
- f: Controls
- The Setup Menu: Camera Setup
- The Retouch Menu:Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Scan of CD-ROM
- Warranty
192
Q
A Video Mode
If no image is displayed, check that camera is correctly connected and that the option
selected for Video mode (0 237) matches the video standard used in the TV.
A Television Playback
Use of an EH-5a AC adapter and EP-5B power connector (available separately) is
recommended for extended playback.
A Slide Shows
The Slide show option in the playback menu can be used for automated playback (0 201).
A Audio
When a movie with sound recorded in stereo using an external microphone is viewed on a
television connected to the camera via an A/V cable, the audio output is monaural.
HDMI
connections support stereo output.
Volume can be adjusted using television controls; the
camera controls can not be used.
D Close the Connector Cover
Close the camera connector cover when the connectors are not in use.
Foreign matter in the
connectors can interfere with data transfer.