Owner's Manual
Table Of Contents
- Quick Start Guide
- Users Manual
- Q&A Index
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- Live View
- Recording and Viewing Movies
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure/Bracketing
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Reset Custom Settings
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- d1: Beep
- d2: Viewfinder Grid Display
- d3: ISO Display and Adjustment
- d4: Viewfinder Warning Display
- d5: Screen Tips
- d6: CL Mode Shooting Speed
- d7: Max. Continuous Release
- d8: File Number Sequence
- d9: Information Display
- d10: LCD Illumination
- d11: Exposure Delay Mode
- d12: Flash Warning
- d13: MB-D11 Battery Type
- d14: Battery Order
- e: Bracketing/Flash
- f: Controls
- The Setup Menu: Camera Setup
- The Retouch Menu:Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Scan of CD-ROM
- Warranty
223
U
❚❚ Flash Control at 1/320 s (Auto FP)
When 1/320 s (Auto FP) is selected for Custom Setting e1 (Flash sync speed,
0 222), the built-in flash can be used at shutter speeds as fast as
1
/320 s, while
optional SB-900, SB-800, SB-700, SB-600, and SB-R200 flash units can be used at any
shutter speed (Auto FP High-Speed Sync).
This option determines the slowest shutter speed available
when front- or rear-curtain sync or red-eye reduction is used in
mode P or A (regardless of the setting chosen, shutter speeds
can be as slow as 30 s in S and M modes or at flash settings of
slow sync, slow rear-curtain sync, or red-eye reduction with slow
sync).
Options range from
1
/60 s (1/60 s) to 30 s (30 s).
Choose the flash mode for the built-in flash.
Flash sync speed 1/320 s (Auto FP) 1/250 s (Auto FP) 1/250 s
Shutter speed
Built-in flash
Optional flash
unit
Built-in flash
Optional flash
unit
Built-in flash
Optional flash
unit
1
/8,000–
1
/320 s — Auto FP — Auto FP — —
1
/320–
1
/250 s Flash sync
*
— Auto FP — —
1
/250–30 s Flash sync
* Flash range drops as shutter speed increases.
Flash range will nevertheless be greater than
that obtained at the same speeds with Auto FP.
D The Flash-Ready Indicator
When the flash fires at full power, the flash-indicator in the camera viewfinder will blink to
warn that the resulting photograph may be underexposed.
Note that the flash-ready
indicators on optional flash units will not display this warning when 1/320 s (Auto FP) is
selected.
e2: Flash Shutter Speed
G button ➜ A Custom Settings menu
e3: Flash Cntrl for Built-in Flash
G button ➜ A Custom Settings menu
Option Description
1 TTL
Flash output is adjusted automatically in response to shooting
conditions.
2 Manual
Choose the flash level (0 224). The camera does not emit monitor pre-
flashes.
3 Repeating flash
The flash fires repeatedly while the shutter is open, producing a strobe-
light effect (0 224).
4 Commander mode
Use the built-in flash as a master flash controlling one or more remote
optional flash units (0 225).