Owner's Manual
Table Of Contents
- Quick Start Guide
- Users Manual
- Q&A Index
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- Live View
- Recording and Viewing Movies
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure/Bracketing
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Reset Custom Settings
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- d1: Beep
- d2: Viewfinder Grid Display
- d3: ISO Display and Adjustment
- d4: Viewfinder Warning Display
- d5: Screen Tips
- d6: CL Mode Shooting Speed
- d7: Max. Continuous Release
- d8: File Number Sequence
- d9: Information Display
- d10: LCD Illumination
- d11: Exposure Delay Mode
- d12: Flash Warning
- d13: MB-D11 Battery Type
- d14: Battery Order
- e: Bracketing/Flash
- f: Controls
- The Setup Menu: Camera Setup
- The Retouch Menu:Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Scan of CD-ROM
- Warranty
247
U
This option is displayed only when an Eye-Fi memory card (available separately from
third-party suppliers) is inserted in the camera.
Choose Enable to upload
photographs to a preselected destination.
Note that pictures will not be uploaded if
signal strength is insufficient.
Observe all local laws concerning wireless devices and choose Disable where
wireless devices are prohibited.
When an Eye-Fi card is inserted, its status is indicated by an icon
in the information display:
• d: Eye-Fi upload disabled.
• e: Eye-Fi upload enabled but no pictures available for upload.
• f (static): Eye-Fi upload enabled; waiting to begin upload.
• f (animated): Eye-Fi upload enabled; uploading data.
• g: Error — camera can not control Eye-Fi card.
If a blinking W appears in the
control panel or viewfinder, refer to page 307; if this indicator is not displayed,
pictures can be taken normally but you may be unable to change Eye-Fi settings.
View the current camera firmware version.
Eye-Fi Upload
G button ➜ B Setup menu
D Eye-Fi Cards
Eye-Fi cards may emit wireless signals when Disable is selected.
If a warning is displayed in
the monitor (0 307), turn the camera off and remove the card.
See the manual provided with the Eye-Fi card, and direct any inquiries to the manufacturer.
The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi
functions.
A Supported Eye-Fi Cards
As of June 2010, the following Eye-Fi cards can be used: 2 GB SD cards in the Share, Home,
and Explore product categories, 4 GB SDHC cards in the Anniversary, Share Video, Explore
Video, and Connect X2 product categories, and 8 GB SDHC cards in the Pro X2 and
Explore X2 product categories.
Eye-Fi cards are for use only in the country of purchase.
Be
sure the Eye-Fi card firmware has been updated to the latest version.
Firmware Version
G button ➜ B Setup menu