Owner's Manual
Table Of Contents
- Quick Start Guide
- Users Manual
- Q&A Index
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- Live View
- Recording and Viewing Movies
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure/Bracketing
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Reset Custom Settings
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- d1: Beep
- d2: Viewfinder Grid Display
- d3: ISO Display and Adjustment
- d4: Viewfinder Warning Display
- d5: Screen Tips
- d6: CL Mode Shooting Speed
- d7: Max. Continuous Release
- d8: File Number Sequence
- d9: Information Display
- d10: LCD Illumination
- d11: Exposure Delay Mode
- d12: Flash Warning
- d13: MB-D11 Battery Type
- d14: Battery Order
- e: Bracketing/Flash
- f: Controls
- The Setup Menu: Camera Setup
- The Retouch Menu:Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Scan of CD-ROM
- Warranty
21
X
First Steps
Charge the Battery
The camera is powered by an EN-EL15 rechargeable Li-ion battery (supplied).
To
maximize shooting time, charge the battery in the supplied MH-25 battery charger
before use.
About 2 hours and 35 minutes are required to fully recharge the battery
when no charge remains.
1 Connect the AC power cable or wall adapter.
Connect the power cable as shown at right.
Use the AC
adapter plug in the position shown; do not rotate.
Depending on the country or region of purchase, an AC
wall adapter may also be supplied with the charger.
To use
the adapter, insert it into the charger AC inlet (q).
Slide
the AC wall adapter latch in the direction shown (w) and
rotate the adapter 90 ° to fix it in the position shown (e).
Reverse these steps to remove the adapter.
2 Remove the terminal cover.
Remove the terminal cover from the battery.
A
C wall adapter latch
90 °