Owner's Manual

40
s
Focus and Shoot
1 Press the shutter-
release button
halfway (0 41).
At default settings, the
camera will focus on the
subject in the center
focus point. Frame a
photo in the viewfinder
with the main subject
positioned in the center
focus point and press
the shutter-release button halfway. If the subject is poorly lit,
the AF-assist illuminator may light.
2 Check indicators in the viewfinder.
When the focus operation is complete, the in-focus indicator
(I) will appear in the viewfinder.
While the shutter-release button is pressed halfway,
focus will lock and the number of exposures that
can be stored in the memory buffer (“t”; 0 105)
will be shown in the viewfinder display.
For information on what to do if the camera is unable to focus
using autofocus, see “Getting Good Results with Autofocus”
(0 100).
Viewfinder display Description
I Subject in focus.
2 Focus point is between camera and subject.
4 Focus point is behind subject.
24
(blinks)
Camera unable to focus on subject in focus
point using autofocus.
Focus
indicator
Buffer
capacity
Focus point