Owner's Manual
Table Of Contents
- Quick Guide
- User Manual
- Reset
- Table of Contents
- Q&A Index
- Lens Compatibility
- Memory Card Compatibility
- For Your Safety
- Notices
- Quick Start Guide
- Supplied Accessories
- Parts & Controls
- Camera Menus
- First Steps
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- List of Menu Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Illumination Switch
- f2: Multi Selector Center Button
- f3: Multi Selector
- f4: Assign Fn Button
- f5: Assign Preview Button
- f6: Assign AE-L/AF-L Button
- f7: Shutter Spd & Aperture Lock
- f8: Assign BKT Button
- f9: Customize Command Dials
- f10: Release Button to Use Dial
- f11: Slot Empty Release Lock
- f12: Reverse Indicators
- f13: Assign MB-D12 AF-ON
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Scan of CD-ROM
- Warranty
65
y
❚❚ Adjusting Settings in the Live View Display
Microphone sensitivity, headphone volume, and monitor
brightness can be adjusted as described below. Note that
microphone sensitivity and headphone volume can not be
adjusted during recording, and that brightness affects the monitor
only (0 53); movies recorded with the camera are unaffected.
1 Highlight a setting.
Press and hold W and press 4 or 2
to highlight the indicator for the
desired setting.
2 Adjust the highlighted setting.
Keeping the W button pressed, press
1 or 3 to adjust the highlighted
setting.
A Using an External Microphone
The optional ME-1 stereo microphone can be used to record sound in
stereo or to avoid recording lens noise caused by autofocus.
A Headphones
Third-party headphones can be used.
Note that high sound levels may
result in high volume; particular care should be taken when
headphones are used.
W button