Owner's Manual

110
S
A The ISO Sensitivity Menu
ISO sensitivity can also be adjusted using the ISO
sensitivity option in the shooting menu
(0 268).
Note that ISO sensitivity can not be adjusted from the shooting menu in
movie live view.
In exposure mode h, ISO sensitivity can however be
adjusted using the S button and main command dial (0 109).
A Hi 0.3–Hi 2
The settings Hi 0.3 through Hi 2 correspond to ISO sensitivities 0.3–2 EV
over ISO 6400 (ISO 8000–25600 equivalent). Pictures taken at these
settings are more likely to be subject to noise (randomly-spaced bright
pixels, fog, or lines).
A Lo 0.3–Lo 1
The settings Lo 0.3 through Lo 1 correspond to ISO sensitivities
0.3–1 EV below ISO 100 (ISO 80–50 equivalent).
Use for larger apertures
when lighting is bright. Contrast is slightly higher than normal; in most
cases, ISO sensitivities of ISO 100 or above are recommended.
A See Also
For information on Custom Setting b1 (ISO sensitivity step value), see
page 287. For information on displaying ISO sensitivity in the control
panel or adjusting ISO sensitivity without using the S button, see
Custom Setting d7 (ISO display and adjustment; 0 295). For
information on using the High ISO NR option in the shooting menu to
reduce noise at high ISO sensitivities, see page 277.