Owner's Manual

156
r
4 Select direct measurement mode.
Release the U button briefly and then
press the button until the L icon in
the control panel starts to flash.
A
flashing D will also appear in the
viewfinder.
The displays will flash for
about six seconds.
5 Measure white balance.
Before the indicators stop flashing, frame the
reference object so that it fills the viewfinder and
press the shutter-release button all the way down.
The camera
will measure a value for white balance and store it in the
preset selected in Step 3.
No photograph will be recorded;
white balance can be measured accurately even when the
camera is not in focus.
A Protected Presets
If the current preset is protected (0 161), 3 will flash in the control
panel and viewfinder if you attempt to measure a new value.
Control panel
Viewfinder