Owner's Manual

172
J
Sharing Custom Picture Controls
Custom Picture Controls created using the Picture Control Utility
available with ViewNX 2 or optional software such as Capture NX 2
can be copied to a memory card and loaded into the camera, or
custom Picture Controls created with the camera can be copied to
the memory card to be used in other D800 cameras and
compatible software and then deleted when no longer needed (if
two memory cards are inserted, the card in the primary slot will be
used; 0 89).
To copy custom Picture
Controls to or from the
memory card, or to delete
custom Picture Controls from
the memory card, highlight
Load/Save in the Manage
Picture Control menu and press 2.
The following options will be
displayed:
• Copy to camera: Copy custom Picture Controls from the memory
card to custom Picture Controls C-1 through C-9 on the camera
and name them as desired.
• Delete from card: Delete
selected custom Picture
Controls from the memory
card.
The confirmation
dialog shown at right will be
displayed before a Picture
Control is deleted; to delete
the selected Picture Control, highlight Ye s and press J.
• Copy to card: Copy a custom Picture Control (C-1 through C-9) from
the camera to a selected destination (1 through 99) on the
memory card.
J button