Owner's Manual
Table Of Contents
- Quick Guide
- User Manual
- Reset
- Table of Contents
- Q&A Index
- Lens Compatibility
- Memory Card Compatibility
- For Your Safety
- Notices
- Quick Start Guide
- Supplied Accessories
- Parts & Controls
- Camera Menus
- First Steps
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- List of Menu Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Illumination Switch
- f2: Multi Selector Center Button
- f3: Multi Selector
- f4: Assign Fn Button
- f5: Assign Preview Button
- f6: Assign AE-L/AF-L Button
- f7: Shutter Spd & Aperture Lock
- f8: Assign BKT Button
- f9: Customize Command Dials
- f10: Release Button to Use Dial
- f11: Slot Empty Release Lock
- f12: Reverse Indicators
- f13: Assign MB-D12 AF-ON
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Scan of CD-ROM
- Warranty
188
l
Flash Compensation
Flash compensation is used to alter flash output by from –3 EV to
+1 EV in increments of
1
/3 EV, changing the brightness of the main
subject relative to the background. Flash output can be increased
to make the main subject appear brighter, or reduced to prevent
unwanted highlights or reflections. If flash compensation is
combined with exposure compensation (0 130), the exposure
values will be added together.
To choose a value for flash compensation, press the M (Y) button
and rotate the sub-command dial until the desired value is
displayed in the control panel.
At values other than ±0.0, a Y icon will be displayed in the control
panel and viewfinder after you release the M (Y) button.
The
current value for flash compensation can be confirmed by
pressing the M (Y) button.
M (Y) button Sub-command dial
±0 EV
(M (Y) button
pressed)
–0.3 EV +1.0 EV