Owner's Manual
Table Of Contents
- Quick Guide
- User Manual
- Reset
- Table of Contents
- Q&A Index
- Lens Compatibility
- Memory Card Compatibility
- For Your Safety
- Notices
- Quick Start Guide
- Supplied Accessories
- Parts & Controls
- Camera Menus
- First Steps
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- List of Menu Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Illumination Switch
- f2: Multi Selector Center Button
- f3: Multi Selector
- f4: Assign Fn Button
- f5: Assign Preview Button
- f6: Assign AE-L/AF-L Button
- f7: Shutter Spd & Aperture Lock
- f8: Assign BKT Button
- f9: Customize Command Dials
- f10: Release Button to Use Dial
- f11: Slot Empty Release Lock
- f12: Reverse Indicators
- f13: Assign MB-D12 AF-ON
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Scan of CD-ROM
- Warranty
202
t
3 Choose the interval.
Press 4 or 2 to highlight
hours, minutes, or seconds;
press 1 or 3 to change.
Choose an interval longer than
the slowest anticipated shutter
speed.
Press 2 to continue.
4 Choose the number of
intervals and number of
shots per interval.
Press 4 or 2 to highlight
number of intervals or number
of shots; press 1 or 3 to
change.
Press 2 to continue.
D Before Shooting
Select a release mode other than self-timer (E) or M
UP when using the
interval timer.
Before beginning interval timer photography, take a test
shot at current settings and view the results in the monitor.
Before choosing a starting time, select Time zone and date in the setup
menu and make sure that the camera clock is set to the correct time and
date (0 27).
Use of a tripod is recommended.
Mount the camera on a tripod before
shooting begins.
To ensure that shooting is not interrupted, be sure the
camera EN-EL15 battery is fully charged. If in doubt, charge the battery
before use or use an EH-5b AC adapter and EP-5B power connector
(available separately).
Number of
intervals
Number
of shots/
interval
Total
number of
shots