Owner's Manual

204
t
A Bracketing
Adjust bracketing settings before starting interval timer photography.
If exposure, flash, or ADL bracketing is active while interval timer
photography is in effect, the camera will take the number of shots in the
bracketing program at each interval, regardless of the number of shots
specified in the interval timer menu.
If white balance bracketing is
active while interval timer photography is in effect, the camera will take
one shot at each interval and process it to create the number of copies
specified in the bracketing program.
A During Shooting
During interval timer photography, the Q icon
will blink in the control panel.
Immediately
before the next shooting interval begins, the
shutter speed display will show the number of
intervals remaining, and the aperture display will
show the number of shots remaining in the current interval. At other
times, the number of intervals remaining and the number of shots in
each interval can be viewed by pressing the shutter-release button
halfway (once the button is released, the shutter speed and aperture
will be displayed until the exposure meters turn off).
To view current interval timer settings, select
Interval timer shooting between shots.
While
interval timer photography is in progress, the
interval timer menu will show the starting time,
the shooting interval, and the number of
intervals and shots remaining. None of these
items can be changed while interval timer
photography is in progress.
Pictures can be played back and shooting and menu settings can be
adjusted freely while interval timer photography is in progress. The monitor
will turn off automatically about four seconds before each interval.