Owner's Manual
Table Of Contents
- Quick Guide
- User Manual
- Reset
- Table of Contents
- Q&A Index
- Lens Compatibility
- Memory Card Compatibility
- For Your Safety
- Notices
- Quick Start Guide
- Supplied Accessories
- Parts & Controls
- Camera Menus
- First Steps
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- List of Menu Settings
- Custom Settings Bank
- a: Autofocus
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- f1: Illumination Switch
- f2: Multi Selector Center Button
- f3: Multi Selector
- f4: Assign Fn Button
- f5: Assign Preview Button
- f6: Assign AE-L/AF-L Button
- f7: Shutter Spd & Aperture Lock
- f8: Assign BKT Button
- f9: Customize Command Dials
- f10: Release Button to Use Dial
- f11: Slot Empty Release Lock
- f12: Reverse Indicators
- f13: Assign MB-D12 AF-ON
- g: Movie
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Scan of CD-ROM
- Warranty
301
U
Choose the flash mode for the built-in flash.
❚❚ Manual
Choose a flash level between Full and 1/128 (
1
/128 of full power). At
full power, the built-in flash has a Guide Number of 12/39 (m/ft, ISO
100, 20 °C/68 °F).
❚❚ Repeating Flash
The flash fires repeatedly while the shutter is
open, producing a strobe-light effect. Press 4
or 2 to highlight the following options, 1 or
3 to change.
e3: Flash Cntrl for Built-in Flash
G button ➜ A Custom Settings menu
Option Description
r TTL
Flash output is adjusted automatically in response to
shooting conditions.
s Manual
Choose the flash level. The camera does not emit
monitor pre-flashes.
t
Repeating
flash
The flash fires repeatedly while the shutter is open,
producing a strobe-light effect.
u
Commander
mode
Use the built-in flash as a master flash controlling
remote optional flash units in one or more groups
(0 303).
Option Description
Output Choose flash output (expressed as a fraction of full power).
Times
Choose the number of times the flash fires at the selected
output. Note that depending on shutter speed and the
option selected for Frequency, the actual number of flashes
may be less than selected.
Frequency Choose how often the flash fires per second.