Owner's Manual
Table Of Contents
- Quick Start Guide
- Reference Manual
- About This Manual
- Parts of the Camera and Main Functions
- The Basics of Shooting and Playback
- Shooting Features
- Auto Mode
- Scene Mode (Shooting Suited to Scenes)
- Special Effects Mode (Applying Effects When Shooting)
- P, S, A, M Modes (Setting the Exposure for Shooting)
- U (User Settings) Mode
- Functions That Can Be Set Using the Multi Selector
- Functions That Can Be Set with the MENU Button (Shooting Menu)
- Functions That Can Be Set with the Fn (Function) Button
- Functions That Cannot Be Used Simultaneously
- Focusing
- Playback Features
- Recording and Playing Back Movies
- General Camera Setup
- Using the Wi-Fi (Wireless LAN) Function
- Connecting the Camera to a TV, Computer, or Printer
- Reference Section
- Using Easy Panorama (Shooting and Playback)
- Viewing and Deleting Images Captured Continuously (Sequence)
- Editing Still Images
- Connecting the Camera to a TV (Viewing Images on a TV)
- Connecting the Camera to a Printer (Direct Print)
- Editing Movies
- The Shooting Menu (P, S, A or M Mode)
- Image Quality
- Image Size
- Picture Control (COOLPIX Picture Control) (Changing the Settings for Image Recording)
- Custom Picture Control (COOLPIX Custom Picture Control)
- White Balance (Adjusting Hue)
- Metering
- Continuous Shooting
- ISO Sensitivity
- Exposure Bracketing
- AF Area Mode
- Autofocus Mode
- Flash Exp. Comp.
- Noise Reduction Filter
- Active D-Lighting
- Multiple Exposure
- Zoom Memory
- Startup Zoom Position
- M Exposure Preview
- The Playback Menu
- The Movie Menu
- The Wi-Fi Options Menu
- The Setup Menu
- Welcome Screen
- Time Zone and Date
- Monitor Settings
- Print Date (Imprinting Date and Time on Images)
- Vibration Reduction
- Motion Detection
- AF Assist
- Digital Zoom
- Assign Side Zoom Control
- Sound Settings
- Auto Off
- Format Memory/Format Card
- Language
- TV Settings
- Charge by Computer
- Toggle Av/Tv Selection
- Reset File Numbering
- Blink Warning
- Eye-Fi Upload
- Peaking
- Reset All
- Firmware Version
- Error Messages
- File Names
- Optional Accessories
- Technical Notes and Index
- Troubleshooting
- Specs
- Index
- Warranty
99
Using the Wi-Fi (Wireless LAN) Function
To Terminate the Wi-Fi Connection
• Turn off the camera.
• Set the Wi-Fi setting on the smart device to Off.
B Notes About Wi-Fi Connection
• Connect to smart device cannot be selected in the following situations:
- When no memory card is inserted in the camera.
- When an Eye-Fi card (E75) is inserted in the camera.
- When the camera is connected to a TV, computer, or printer.
- When the battery level indicator in the monitor indicates B. In addition, if the
battery level indicator becomes low when Wi-Fi is connected, the connection is
terminated.
• Terminate the Wi-Fi connection in a place where the use of radio waves is
prohibited.
• When Wi-Fi is connected, Auto off is disabled.
• When Wi-Fi is connected, the battery drains faster than normal.
• It may take some time until the SSID is displayed on the smart device after
Connect to smart device is performed.
C Notes About Security Settings
If the camera is installed with the Wi-Fi function without proper security settings
(encryption and password), unauthorized third parties may access the network and
cause harm. We strongly recommend performing the required security settings
before using the Wi-Fi function.
Use Options of Wi-Fi options to perform the security settings (E58) .