Owner's Manual

E77
Reference Section
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution A
Battery temperature
is elevated. The
camera will turn off.
The camera turns off automatically. Wait until
the battery has cooled before resuming use.
–
The camera will turn
off to prevent
overheating.
The inside of the camera has become hot.
The camera turns off automatically. Wait until
the camera has cooled before resuming use.
–
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write”
position.
–
This card cannot be
used.
An error occurred while accessing the memory
card.
• Use an approved card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly
inserted.
25
24
24
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for
use in the camera.
Formatting deletes all data saved on the
memory card. If you need to keep copies of any
images, make sure to select No and save the
copies to a computer or other medium before
formatting the memory card. Select Ye s and
press the k button to format the memory card.
24, F5
Not available if Eye-Fi
card is locked.
The write-protect switch of the Eye-Fi card is in
the “lock” position.
–
An error occurred while accessing the Eye-Fi
card.
• Check that the terminals are clean.
• Confirm that the Eye-Fi card is correctly
inserted.
24
24
Out of memory. Delete images or insert a new memory card.
37, 94,
24