Owner's Manual
Table Of Contents
- Quick Start Guide
- Reference Manual
- About This Manual
- Parts of the Camera and Main Functions
- The Basics of Shooting and Playback
- Shooting Features
- Auto Mode
- Scene Mode (Shooting Suited to Scenes)
- Special Effects Mode (Applying Effects When Shooting)
- P, S, A, M Modes (Setting the Exposure for Shooting)
- U (User Settings) Mode
- Functions That Can Be Set Using the Multi Selector
- Functions That Can Be Set with the MENU Button (Shooting Menu)
- Functions That Can Be Set with the Fn (Function) Button
- Functions That Cannot Be Used Simultaneously
- Focusing
- Playback Features
- Recording and Playing Back Movies
- General Camera Setup
- Using the Wi-Fi (Wireless LAN) Function
- Connecting the Camera to a TV, Computer, or Printer
- Reference Section
- Using Easy Panorama (Shooting and Playback)
- Viewing and Deleting Images Captured Continuously (Sequence)
- Editing Still Images
- Connecting the Camera to a TV (Viewing Images on a TV)
- Connecting the Camera to a Printer (Direct Print)
- Editing Movies
- The Shooting Menu (P, S, A or M Mode)
- Image Quality
- Image Size
- Picture Control (COOLPIX Picture Control) (Changing the Settings for Image Recording)
- Custom Picture Control (COOLPIX Custom Picture Control)
- White Balance (Adjusting Hue)
- Metering
- Continuous Shooting
- ISO Sensitivity
- Exposure Bracketing
- AF Area Mode
- Autofocus Mode
- Flash Exp. Comp.
- Noise Reduction Filter
- Active D-Lighting
- Multiple Exposure
- Zoom Memory
- Startup Zoom Position
- M Exposure Preview
- The Playback Menu
- The Movie Menu
- The Wi-Fi Options Menu
- The Setup Menu
- Welcome Screen
- Time Zone and Date
- Monitor Settings
- Print Date (Imprinting Date and Time on Images)
- Vibration Reduction
- Motion Detection
- AF Assist
- Digital Zoom
- Assign Side Zoom Control
- Sound Settings
- Auto Off
- Format Memory/Format Card
- Language
- TV Settings
- Charge by Computer
- Toggle Av/Tv Selection
- Reset File Numbering
- Blink Warning
- Eye-Fi Upload
- Peaking
- Reset All
- Firmware Version
- Error Messages
- File Names
- Optional Accessories
- Technical Notes and Index
- Troubleshooting
- Specs
- Index
- Warranty
Technical Notes and Index
F3
B Turn the Product off Before Removing or Disconnecting the Power
Source or the Memory Card
Do not remove the battery while the product is on, or while images are being saved
or deleted. Forcibly cutting power in these circumstances could result in loss of data
or in damage to product memory or internal circuitry.
B Notes About the Monitor
• Monitors and electronic viewfinders are constructed with extremely high precision;
at least 99.99% of pixels are effective, with no more than 0.01% being missing or
defective. Hence while these displays may contain pixels that are always lit (white,
red, blue, or green) or always off (black), this is not a malfunction and has no effect
on images recorded with the device.
• Images in the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker,
contact your Nikon-authorized service representative.
The Battery
• Be sure to read and follow the warnings in “For Your Safety” (Avii-ix) before
use.
• Check the battery level before using the camera and replace or charge the
battery if necessary. Do not continue charging once the battery is fully
charged as this will result in reduced battery performance. Whenever
possible, carry a fully charged spare battery when taking images on
important occasions.
• Do not use the battery at ambient temperatures below 0°C (32°F) or above
40°C (104°F).
• Charge the battery indoors with an ambient temperature of 5°C to 35°C
(41°F to 95°F) before use.
• When the battery temperature is between 0°C and 10°C (32°F to 50°F) or
45°C to 60°C (113°F to 140°F), the chargeable capacity may decrease.
• The battery is not charged at ambient temperatures below 0°C (32°F) or
above 60°C (140°F).
• Note that the battery may become hot during use; wait for the battery to
cool before charging. Failure to observe these precautions could damage
the battery, impair its performance, or prevent it from charging normally.
• On cold days, the capacity of batteries tends to decrease. If an exhausted
battery is used at a low temperature, the camera will not turn on. Be sure
that the battery is fully charged before heading outside to take images in
cold weather. Keep spare batteries in a warm place and exchange as
necessary. Once warmed, a cold battery may recover some of its charge.
• Dirt on the battery terminals can prevent the camera from functioning.
Should the battery terminals become dirty, wipe them off with a clean, dry
cloth before use.