Owner's Manual

48
Shooting Features
B Pet Portrait Auto Release
• Press the multi selector J (n) to change the Pet portrait auto release settings.
- Y: The camera automatically releases the shutter when it detects a dog or cat
face.
- Off: The camera does not release the shutter automatically, even if a dog or cat
face is detected. Press the shutter-release button. The camera also detects
human faces when Off is selected.
• Pet portrait auto release is set to Off after 5 bursts have been taken.
• Shooting is also possible by pressing the shutter-release button, regardless of the
Pet portrait auto release setting. When Continuous is selected, you can take
images continuously while holding down the shutter-release button all the way.
B Focus Area
• When the camera detects a face, the face is
displayed inside a yellow border. When the
camera acquires focus on a face displayed inside
a double border (focus area), the double border
turns green. If no faces are detected, the camera
focuses on the area in the center of the frame.
• In some shooting conditions, the pet face may
not be detected and other subjects may be
displayed inside a border.
y M O Pet portrait
• When you point the camera at a dog or cat, the camera detects the pet’s face
and focuses on it. By default, the shutter is automatically released when a dog or
cat face is detected (pet portrait auto release).
• From the screen displayed after O Pet portrait is selected, select Single or
Continuous.
- Single: Whenever a dog or cat face is detected, the camera captures 1 image.
- Continuous: Whenever a dog or cat face is detected, the camera captures
3 images continuously.
1/250 F5.6
840
25m 0s25m 0s