Owner's Manual

93
Movies
Capturing Still Images While Recording Movies
If the shutter-release button is pressed all the way
while recording a movie, one frame is saved as a still
image (JPEG image). Movie recording continues while
the still image is being saved.
• A still image can be captured when Q is displayed
on the screen. When f is displayed, a still image
cannot be captured.
• The size of the captured still image is determined by
the movie image size (A145).
B Notes About Capturing Still Images During Movie Recording
• Still images cannot be saved during movie recording in the following situations:
- When movie recording is paused
- When the remaining movie recording time is less than five seconds
- When Movie options (A145) is set to HS movie
• Up to 20 still images can be saved while recording a single movie when Movie options is
set to J 2160/30p or K 2160/25p.
• It may take some time to save the images after shooting.
• The frames of a movie that were recorded when a still image was being captured may not
play back smoothly.
• The sounds of operating the shutter-release button when saving a still image may be
heard in the recorded movie.
• If the camera moves when the shutter-release button is pressed, the image may be
blurred.
Capturing Still Images While Recording Movies
1 2 m 3 0 s
12m30s