Owner's Manual

183
Technical Notes
Error Messages
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution A
Battery temperature
is elevated. The
camera will turn off.
The camera turns off automatically. Wait until the
camera or battery temperature has cooled before
resuming use.
–
The camera will turn
off to prevent
overheating.
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write” position.
–
This card cannot be
used.
An error occurred while accessing the memory card.
• Use an approved memory card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly inserted.
15, 200
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card.
If you need to keep copies of any images, make sure to
select No and save the copies to a computer or other
medium before formatting the memory card. Select
Ye s and press the k button to format the memory
card.
15, 181
Out of memory. Delete images or insert a new memory card. 15, 30
Image cannot be
saved.
An error occurred while saving the image.
Insert a new memory card or format the memory card.
15, 165
The camera has run out of file numbers.
Insert a new memory card or format the memory card.
15, 165
Image cannot be
modified.
Check that the images can be edited. 83, 192
Cannot record
movie.
A time-out error occurred while saving the movie on
the memory card.
Select a memory card with a faster write speed.
200
Cannot reset file
numbering.
File numbering cannot be reset because the sequential
number of a folder has reached the upper limit.
Insert a new memory card or format the memory card.
15, 165