Owner's Manual

184
Technical Notes
Error Messages
Memory contains no
images.
Insert a memory card that contains images.
15
File contains no
image data.
The file was not created or edited with this camera.
The file cannot be viewed on this camera.
View the file using a computer or the device used to
create or edit this file.
–
All images are
hidden.
• There are no images available for a slide show, etc.
• There are no images that can be displayed on the
image selection screen for deletion.
–
This image cannot be
deleted.
The image is protected.
Disable protection.
153
Raise the flash.
• When the scene mode is Scene auto selector, you
can capture an image even if the flash is lowered but
the flash will not fire.
• When the scene mode is Night portrait or
Backlighting with HDR set to Off, you must raise
the flash to capture an image.
37
36, 39
Lens error. Try again
after turning the
camera off and on.
If the error persists, contact your retailer or Nikon-
authorized service representative.
186
Communications
error
An error occurred while communicating with the
printer.
Turn the camera off and reconnect the USB cable.
103
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the battery,
and turn the camera on. If the error persists, contact
your retailer or Nikon-authorized service representative.
186
Printer error: check
printer status.
After solving the problem, select Resume and press the
k button to resume printing.*
–
Printer error: check
paper.
Load the specified size of paper, select Resume, and
press the k button to resume printing.*
–
Printer error: paper
jam.
Remove the jammed paper, select Resume, and press
the k button to resume printing.*
–
Printer error: out of
paper.
Load the specified size of paper, select Resume, and
press the k button to resume printing.*
–
Printer error: check
ink.
There is a problem with the printer’s ink.
Check the ink, select Resume
, and press the k but
t
on
to resume printing.*
–
Display Cause/Solution A