Owner's Manual

Table Of Contents
191
Technical Notes
Troubleshooting
Saving images
takes time.
It may take more time to save images in the following
situations:
When the noise reduction function is in operation
When the flash mode is set to V (auto with red-eye
reduction/red-eye reduction)
When capturing images in the following scene modes.
- Hand-held in Night landscape
- Noise reduction burst in Landscape or Close-up
- HDR is set to On in Backlighting
- Easy panorama
Continuous in the shooting menu is set to Continuous H:
120 fps or Continuous H: 60 fps
When using smile timer while shooting
When using Active D-Lighting while shooting
When using multiple exposure while shooting
When Image quality is set to RAW, RAW + Fine, or RAW +
Normal
When capturing still images while recording a movie with
Movie options set to 2160/30p or 2160/25p
57
36
37, 38
39
44
111,
130
60
140
141
118
93
A ring-shaped
belt or rainbow-
colored stripe
appears on the
screen or
images.
When shooting with backlighting or when a very strong light
source (such as sunlight) is in the frame, a ring-shaped belt or
rainbow-colored stripe (ghosting) may occur.
Change the position of the light source, or frame the picture so
that the light source does not enter the frame, and try again.
Cannot select a
setting/
Selected setting
is disabled.
Certain menu items are unavailable depending on the
shooting mode. Menu items that cannot be selected are
displayed in gray.
A function that restricts the selected function is enabled.
Problem Cause/Solution
A