Quick start Guide

9
Getting Started
Here, pairing refers to the setting used to connect the camera and smartphone or
tablet (below, “smart device”) through Bluetooth.
• The smart device screen and buttons may differ from the actual screen.
Preparing for Pairing
Prepare for pairing in advance.
• Smart device:
- Install the SnapBridge 360/170 app on your smart device (Aiv).
- Enable Bluetooth and Wi-Fi on the smart device.
- When using NFC on an NFC-compatible Android device, enable
NFC.
• Camera:
- Turn off the camera (A8). The camera cannot enter pairing
standby mode when the camera is on.
- Turn off the airplane mode switch (A1). You cannot pair when it is on.
Start pairing when preparations are complete.
The pairing procedure varies depending on how you use the camera. Proceed from
“Initial Pairing” (A10) or “Re-pairing” (A12).
Pairing with a Smartphone or Tablet