User Manual

97
Using Location Data Functions
Recording the Location Data on the Image
Set Time zone and date (A162) correctly before using the location data functions.
1 Set Use built-in location data to On.
• After the settings are complete, press the d
button or shutter-release button to exit the menu.
• To receive signals easily, operate in an open-air
area.
2 Check the location data reception on
the shooting screen.
• n or o: Signals are being received from four or
more satellites, or from three satellites, and
location data is being obtained. The location data
is recorded on the image.
• z: Signals are being received, but location data
cannot be obtained. The location data is not
recorded on the image.
• y: Signals cannot be received from the satellites,
and location data cannot be obtained. The location data is not recorded on the
image.
3 Shoot images while positioning is being performed.
• The location data is recorded on shot images.
• z is displayed on images with recorded location data in the camera’s playback
screen (A7).
• The recorded location data can be checked on a map by using ViewNX-i after
transferring images to a computer (A115).
Recording the Location Data on the Image
Press the d button M z menu icon M Location data options M k button
Use built-in location data
On
O
40
10
0
-10
30
20
2 5 m 0 s25m 0s
5 0 0500
1 5m15m
1 01 0 h P a1010hPa
Location data reception