User Manual

103
Using Location Data Functions
Recording the Log of Movement Information
Ending Log Recording and Saving Logs on a Memory
Card
Recorded logs must be saved on a memory card in order to display them as a graph.
1 When log recording is completed,
select the log to end and press the
k button.
• You can select the log to end recording before the
specified time duration elapses.
2 Select Save logs, and press the
k button.
• The log data is saved on a memory card.
• To check if the log data was saved to the memory
card, select View log in the location data options
menu.
B Notes About Log Data
• No log data is saved if the camera is unable to calculate any location data between the
time that log recording starts and ends.
• See “Log Data Saved on Memory Cards” (A206) for more information.
C To Erase Log Data
• To erase the log data that is temporarily saved in the camera, select Erase logs in step 2.
• To erase the log data that is saved on the memory card, select Location logs or Altitude/
depth logs in View log (A159), and press the l button.
C Location Log Data
Log data is NMEA format-compliant. However, the log data is not guaranteed to display in all
NMEA format-compliant software or cameras.
Press the d button M z menu icon M Create log M k button
Create log
Start all logs
End all logs
Start location log
End location log
Start depth log
End depth log
Create log
Save logs
Erase logs