User Manual

190
Technical Notes
Error Messages
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution
A
Battery temperature is
elevated. The camera will
turn off.
The camera turns off automatically. Wait until the
camera or battery temperature has cooled
before resuming use.
–
The camera will turn off to
prevent overheating.
The battery is cold. Frame
size/rate set to 1080/30p.
The battery temperature is below 0°C (32°F). If you
want to continue recording movies with the size/
frame rate set to d 2160/30p (4K UHD), c
2160/25p (4K UHD), e 1080/60p,
f 1080/50p, h HS 480/4×, a
HS 480/4×, j HS 1080/0.5×, or
Y HS 1080/0.5×, remove the battery from the
camera and warm it up with your palms, etc.
before use.
82
The battery is cold. Frame
size/rate set to 1080/25p.
The battery is cold, limiting
access to some features.
Battery exhausted.
• Charge the battery.
• The battery temperature went below 0°C
(32°F) while recording movies with the size/
frame rate set to d 2160/30p (4K UHD),
c 2160/25p (4K UHD), e 1080/60p,
f 1080/50p, h HS 480/4×,
a HS 480/4×, j HS 1080/0.5×, or
Y HS 1080/0.5×. The camera stops
recording and automatically turns off. To
continue recording, change the movie
options. If you want to continue recording
movies with the size/frame rate set to
d 2160/30p (4K UHD), c 2160/25p
(4K UHD), e 1
080
/60p, f 1080/50p,
h HS 480/4×, a HS 480/4×,
j HS 1080/0.5×, or Y HS 1080/0.5×,
remove the battery from the camera and
warm it up with your palms, etc. before use.
11, 13,
185
82
Memory card is write
protected.
The write-protect switch is locked. Unlock it. –
This card cannot be used.
An error occurred while accessing the memory card.
• Use an approved memory card.
• Check that the terminals are clean.
•
Confirm that the memory card is correctly inserted.
11, 217
This card cannot be read.