User's Manual

105Appendices
Troubleshooting
Troubleshooting
Problem Solution Page
“POWER” LED does not
light.
• Turn the WT-7 on.
• Confirm that the battery is
inserted and fully charged.
11, 20, 59, 66
4, 91
Network option not
available.
Confirm that the WT-7 is
connected and on.
11, 20, 59, 66
Excessive radio
interference.
Adjust the position of the wireless
access point or host computer.
—
All LEDs flash at once.
WT-7 hardware or battery
malfunction. Contact a Nikon-
authorized service representative.
—
Camera displays TCP/IP
or FTP error.
• Check settings for host and/or
wireless LAN adapter and adjust
camera settings appropriately.
• Check firewall settings.
• Confirm that you can write to
the destination folder on the ftp
server.
• Highlight the network profile
created with the camera and
press the W (M) button, then
select FTP and choose a
different option for PASV
mode.
10, 18, 58,
65, 86
9
—
88