User's Manual

6 Introduction
Getting Ready
The Wireless Transmitter Utility
The Wireless Transmitter Utility is used for pairing in image transfer
and camera control modes (016) and can also help create
network profiles (093). You can install the utility after
downloading it from the following website:
http://downloadcenter.nikonimglib.com/
Be sure to use the latest versions of the Wireless Transmitter Utility
and the camera firmware.
A Removing the Battery
Being careful not to drop the battery, open the
WT-7 battery-chamber cover and remove the
battery as shown at right.
A Stand-By Mode
When the WT-7 is disconnected from the camera or the camera is
turned off, the WT-7 will turn off automatically after the delay chosen for
Network > Options > Auto power off delay in the setup menu (092),
reducing the drain on the battery.