User's Manual

75FTP
Wireless Connections
Step 4: Network Settings
Follow the steps below to connect to the ftp server. Skip Step 1 if
you selected Direct (access point) in Step 6 on page 69.
1 Obtain or select an IP address.
Highlight one of the following options
and press J.
• Obtain automatically: Select this option if
the network is configured to supply the
IP address automatically. The camera
will display the IP address provided by the network; press J
to proceed.
• Enter manually: When prompted, enter an IP address and
subnet mask by pressing 4 and 2 to highlight segments
and 1 and 3 to change. Press J when entry is complete.
The camera will display the selected IP address; press J to
proceed.
2 Choose the server type.
Highlight FTP or SFTP (secure ftp) and
press J. If you selected Direct (access
point) in Step 6 on page 69, proceed to
Step 4.