User's Manual

Procedures for close-up flash operation (using cords)

114

Checking the illumination before actually taking pictures

(Modeling Illumination) in close-up flash operation (using

cords)

Press the Target Light button on the SU-800 and

release within one second and the SB-R200’s flash

fires repeatedly at a reduced flash output level. This is

useful for checking the illumination and the shadows

cast on the subject before actually taking the picture.

Using the Target Light (Focus-assist Illuminator) in

close-up flash operation (using cords)

Press the Target Light button on the SU-800 for more

than one second, the Target Light on the SB-R200

lights up.

• The Target Light illuminates for 60 seconds and goes out

automatically. To cancel the illumination within 60 seconds,

press the Target Light button again for more than one

second.

• The Target Light also goes out when:

Releasing the shutter

Test firing

Firing the Modeling Illuminator

Pressing the [ON/OFF] button

• Pressing the Target light button on the SB-R200 is invalid.

READY

LOCK

SEL

READY

LOCK

SEL