User's Manual

1 SB-R200’s available flash operations

The following flash operations are available with the SB-R200. Refer to the

corresponding pages for details on each flash operation.

*1 The optional TTL Cord SC-30 is required (p. 123).

Note: With CLS-compatible cameras, the TTL Cord SC-30 (optional) is not required.

v Commander mode of SB-910, SB-900, SB-800 and SB-700

In the Commander mode, although the SB-910, SB-900, SB-800 or SB-700 is set as the

Master flash unit and its flash mode is set to Flash canceled (---), the flash will fire at a

reduced flash output level. This may affect the correct exposure of the subject if the subject

is close. To limit this effect as much as possible, bounce the light by tilting or rotating the

flash head.

Available flash operation Usable cameras and Speedlights

Close-up (p. 65)

CLS-compatible cameras, cameras not compatible with CLS

SU-800

Commander (p. 79) CLS-compatible cameras featuring Commander function,

SU-800, SB-910, SB-900, SB-800, SB-700