Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Table of Contents
- Q & A Index
- Compatible Cameras
- Supplied Accessories
- Parts & Controls
- Check Before Use
- Operation
- Inserting the Batteries
- Replacing / Recharging Batteries
- Attaching to a Camera
- Detaching from a Camera
- Adjusting the Flash Head
- Power On
- Selecting Flash Mode
- Settings and the LCD
- Custom Functions and Settings
- Flash Modes
- Manual Flash Mode
- Distance-Priority Manual Flash Mode
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Updating Firmware
- Specs
- Index
- A Collection of Example Photos
- Warranty
E–12
Functions
E
t Using the built-in bounce card
In bounce flash photography, use the SB-700’s built-in bounce card •
to make a portrait subject’s eyes look more vibrant by reflecting the
light in them.
Tilt the flash head up 90°. •
Setting the built-in bounce card
Pull out the bounce card and the built-
in wide panel and, while holding the
bounce card, slide the built-in wide
panel back into place inside the ash
head.
To insert the bounce card, pull out the •
built-in wide panel again and slide
both back into place together.