Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Table of Contents
- Q & A Index
- Compatible Cameras
- Supplied Accessories
- Parts & Controls
- Check Before Use
- Operation
- Inserting the Batteries
- Replacing / Recharging Batteries
- Attaching to a Camera
- Detaching from a Camera
- Adjusting the Flash Head
- Power On
- Selecting Flash Mode
- Settings and the LCD
- Custom Functions and Settings
- Flash Modes
- Manual Flash Mode
- Distance-Priority Manual Flash Mode
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Updating Firmware
- Specs
- Index
- A Collection of Example Photos
- Warranty
H–1
Tips on Speedlight Care and Reference Information
H
H
Tips on Speedlight Care and Reference Information
This section explains troubleshooting, Speedlight care, speci cations
and optional accessories.
Troubleshooting
If a warning indicator appears, use the following chart to determine
the cause of the problem before taking the Speedlight to a retailer or
Nikon representative for repair.
Problems with the SB-700
Problem Cause Solution
0
The power cannot
be turned on.
The batteries are not
correctly installed.
Insert the batteries
correctly.
B-8
Battery power is weak. Replace the batteries. B-10
The ash-ready
indicator does not
light up.
The standby function is
activated.
Press the camera •
shutter-release button
halfway.
Turn the SB-700 on.•
E-30
Battery power is weak. Replace the batteries. B-10
The effective ash
output distance
range does not
appear.
The ash head is not set
to the front position.
Set the ash head to
the front position.
B-13
Aperture information has
not been received from
the camera.
Check camera settings.
•
Detach and attach the
•
SB-700 on a camera.
—
The SB-700 cannot
receive focal length
information from the
camera.
Turn the SB-700 and
camera off, and then
turn them on again.
—