Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Table of Contents
- Q & A Index
- Compatible Cameras
- Supplied Accessories
- Parts & Controls
- Check Before Use
- Operation
- Inserting the Batteries
- Replacing / Recharging Batteries
- Attaching to a Camera
- Detaching from a Camera
- Adjusting the Flash Head
- Power On
- Selecting Flash Mode
- Settings and the LCD
- Custom Functions and Settings
- Flash Modes
- Manual Flash Mode
- Distance-Priority Manual Flash Mode
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Updating Firmware
- Specs
- Index
- A Collection of Example Photos
- Warranty
H–7
Tips on Speedlight Care and Reference Information
H
Tips on Speedlight Care
Cleaning
Dirt on the flash panel can cause it to break when the flash is fired. •
Clean the flash panel regularly.
Use a blower brush to remove dirt and dust from the SB-700 •
and clean it with a soft, clean cloth. After using the SB-700 near
saltwater, wipe the flash unit with a soft, clean cloth moistened
slightly with plain water to remove the salt, then dry it using a dry
cloth.
On rare occasions, the LCD may turn on or go dark, due to static •
electricity. This is not a malfunction. The display will soon return to
normal.
Do not drop the SB-700 or hit it against a hard surface, as this may •
damage its precision mechanisms. Do not apply strong pressure to
the LCD panel.
"
WARNING
Never use thinner, benzene, or other active agents
when cleaning the Speedlight, as this may damage
the Speedlight or cause it to catch fire. Using these
agents may also impair your health.